Analog Resolution Maximum Refresh Rate How does HP install software and gather data? Open download list On the rear of the computer, a slot cover lock secures the expansion card brackets in place. If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled SATA1 to avoid any hard drive performance problems.
|Date Added:||6 May 2005|
|File Size:||27.57 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
When reinstalling an existing heatsink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor. Is my Windows version bit or bit?
Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. Enter text from picture: The M3 metric retainer screws for diskette drives or media card readers are black. The expansion slots accommodate full-height or half-height expansion cards.
HP DX2810 MAINBOARD SOCKET 775 REFURBISH (508460-001)
When installing an expansion card, press firmly on dc2810 card so that the whole connector seats properly in the expansion card slot. Installing Additional Drives When installing additional drives, follow these guidelines:.
Grasp the cable end of the connector and pull it straight up 2. Refer to Installing Additional Drives for an illustration of the retainer screws location. Let HP identify any out-of-date or missing drivers and software. Intel Celeron E Processor 1. Replace the slot cover lock and secure it in place with the screw that was previously removed.
The Virtual Agent is currently unavailable.
Hp compaq dx price, harga in Malaysia
Squeeze on the top of the retaining latch attached to the cable end of the connector 1. If you are adding a second hard drive, connect the data cable to the light blue connector labeled SATA3. Reset the date and time, your passwords, and any special system setups, using Computer Setup.
All other drives use M3 metric screws. After installing a new system board, always update the system ROM to ensure that the latest version of the BIOS is being used on the computer. Not sure which drivers to choose? The computer should automatically recognize the additional dz2810 when you turn on the computer.
Please try again shortly. HP recommends dual-channel symmetric configurations for maximum performance. The memory module sockets have gold-plated metal contacts. Battery The battery that comes with your computer provides power to the real-time clock and has a lifetime of about three years.
HP Compaq dx2810 Quickspecs
Spare power supplies normally arrive set for V. Email list of drivers.
No software or drivers hl available for this product with the selected operating system. XMM3 socket, Channel B populate second. Keep all screws with the units removed. Slide the drive in through the front of the chassis 1 until the screw holes on the drive are aligned with the screw holes on the drive cage and install ex2810 two M3 metric retainer screws 2 as shown in the following illustration. To install an external 3. If needed, HP has provided extra drive retainer screws on the interior of the front bezel that are used to secure the drives in the drive cage.
Do not rely on components like the drive cage, power supply, or computer cover to push cables down into the chassis.