ASUS P4P800-E RAID CONTROLLER DRIVER

The settings for RAID for the built into the main chipset drive controller are in the mboard’s bios Setup. Virus Problem, Please Help. Pressing Ctrl-F any way does not get you in either. The issue is either you didn’t use the setup utility to assign drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array. Also have to make sure you have the sata driver and not the raid driver. And there is no safety on it.

Uploader: Tenos
Date Added: 6 June 2007
File Size: 64.85 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 8811
Price: Free* [*Free Regsitration Required]

Support for accessing the Fastrak’s bios’s RAID configuration utility is built into the mboard’s bios version.

P4PE Deluxe home support page http: Originally Posted by blackduck30 you have to go into the bios and make sure the promise controller is ide mode and not the raid mode. Virus Problem, Please Help.

Don’t forget it is easiest if you use a floppy to load the driver. Windows claims the Promise drivers are installed there is a trick but I cannot remember!!

Net is the opinions of its users. Computer powers off in sleep mode Thousands of users waiting to help! Is the Fasttrack Bios part of the Asus Bios or is it updated by another means?

  ELEMENT14 WIPI DRIVER DOWNLOAD

P4PE Deluxe | ASUS Global

Remove Advertisements Sponsored Links. Also have to make sure you have the sata driver and not the raid driver. XP Pro sp2 My System. I would backup and restore to an external drive to keep controler data. Yes No I don’t have a dog.

Suspicious Activity Detected

To make sure they install properly go to device managed and uninstall the old FastTrak driver, reboot and when new hardware is found point to your downloaded driver there was no need to cut to disc Hope this helps. Hi, Here is a copy of that thread from Clintfan. A Pit Bull is like a gun you can pet. I doubt the message no bios installed is correct for diag use. The issue is either you didn’t use the setup utility to assign drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array.

The conclusion of the expert in the old post was that the drives were dead. If you want the operating system to be on the RAID array This is about as good as it gets and if you read it, you will most likely be able to set up what you want to: I did it successfully a couple of years ago. Current Temperatures Take II.

  DELL PCMCIA MTD-0002 DRIVER

Net cannot verify the validity of the statements made on this site. I remember Clintfan explained how to set up non raid sata drives on the promise controller on a P4P E. This ancient technology is great isn’t it! I will upload the exact options later if you need them.

Standard SATA Operation on RAID Controller? (Asus P4PE Deluxe) – Ars Technica OpenForum

Such opinions may not be accurate and they are to be used at your own risk. Over a Month Ago Time Zone: Thats is WinXP see’s the array and all the data is there and it works fine. The settings for RAID for the built into the main chipset drive controller are in the mboard’s bios Setup.

All times are GMT raud But when I boot the machine I see the same situation as the old post. If you don’t respond to that within x 5?

contrroller

There’s no need to load the Fastrak’s bios if no drives are detected connected to the controller.